Water Main Break Chicago What To Do

water main break chicago

 

What a Water Main Break Does to Your Water, and What to Do About It

 

When a water main breaks near your home, the city takes care of the pipe in the street. What happens inside your house is your job: the pressure drops or disappears, the water comes back brown or cloudy, sediment moves into your fixtures and water heater, and in a city with an estimated 400,000 lead service lines, there is a lead question on top of everything else. This guide covers how to tell whether the break is the city’s or yours, what to do in the first hour, how to protect your water heater and appliances, what Chicago and the EPA advise if you have a lead service line, and what a boil order actually asks of you.

 

The short version

 

  • Call 311 to report a break or a suspected leak. The city’s Department of Water Management determines whether it’s on the public or private side.

 

  • Run cold water first, until it runs clear. Hold off on hot water, laundry, and the dishwasher until it does.

 

  • If you have, or might have, a lead service line: flush the tap 3 to 5 minutes, use only cold water for drinking and cooking, and use a filter certified for lead.

 

Is It the City’s Main or Your Own Line?

 

Start with the phone number: 311. The City of Chicago’s Department of Water Management (DWM) says to call 311 to report a leak or a break on your water service line, and that a DWM investigator will identify whether the leak or break is on private or public property. DWM repairs the public side. The property owner is responsible for repairs on the private side. If you’re in a suburb rather than the city, the same steps apply, but call your village’s public works department instead of 311.

 

That dividing line decides what you do next. A break in the main in the street is the city’s to fix, and your job is to protect what’s inside the house. A leak or break on your own service line is a plumbing repair, and in Chicago it can come with a program worth knowing about before you pay for anything. DWM’s Leaks and Breaks program offers free lead service line replacement and a new water meter for properties with a leaking or broken lead service line, for any building type. DWM’s block-level program covers properties affected by water main or sewer main replacement work. Eligibility and details change, so ask 311 before you hire anyone to replace a lead line.

 

What You’ll Notice Inside Your House

 

  • No water or low pressure. The most obvious sign, and it often affects the whole block.

 

  • Sputtering faucets. Air in the lines as service is restored. Utilities commonly explain that water that looks milky but clears from the bottom of a glass is air, not sediment.

 

  • Brown, yellow, or gritty water. Sediment and rust. Water mains accumulate deposits on their walls over time, and utilities generally explain that shutting off and refilling a main, or a sudden change in flow, can stir those deposits up and carry them into homes.

 

  • A boil order. DWM can issue one after a break or a major repair, and it has said it does so in consultation with the Illinois EPA. Follow the city’s notice.

 

What to Do in the First Hour

 

  1. Report it if it hasn’t been reported. Call 311 if you see water in the street or parkway, or if you suspect a leak on your side of the line.
  2. Don’t drink or cook with discolored water. Wait until it runs clear, and follow any city advisory.
  3. Run cold water first, not hot. Water utilities commonly advise opening a cold tap, usually the one closest to where the water enters the house, or an outdoor spigot, and running it until it clears. Avoid hot water until the cold is clear, so sediment isn’t drawn into the water heater.
  4. Hold off on laundry and the dishwasher until the water is clear, so sediment doesn’t end up in your clothes or appliances.
  5. Clean the aerators and check the screens. Unscrew faucet aerators and rinse out any grit, and check the screens at the washing machine’s hose connections.
  6. Open faucets slowly when service returns, and look for drips at fittings once the pressure is back.
  7. Note the time and take photos of anything that looks wrong, including the water itself, which helps if you later need to describe what happened.

 

Your Water Heater, Filters, and Appliances After Discolored Water

 

The water heater is where sediment collects. If your cold water has cleared but the hot water is still discolored, the sediment is likely in the tank, and draining a few gallons from the tank’s drain valve can clear it. Our guide on what causes water heater sediment explains why it settles at the bottom and what a proper flush involves. If the hot water stays cloudy, or you hear popping from the tank afterward, our water heater services team can flush the tank and check the unit.

 

If you have a whole-house filter, check it once the water clears, because sediment can load a filter faster than normal and cartridges that look dirty should be replaced. If you have a water softener, check the manufacturer’s instructions or ask your installer whether to bypass it until the water runs clear. If you’re deciding whether to add or upgrade filtration, our water filtration installation service can help, and for lead, ask for the lead-reduction certification before you buy.

 

If You Have a Lead Service Line

 

Chicago has an estimated 400,000 lead service lines, by the city’s own count as reported by WTTW, and construction near them is when lead is most likely to get into the water. WTTW’s reporting on an EPA study of Chicago homes notes that higher lead levels occurred mainly after construction disrupted the lines. A main break and its repair can disturb the lines in a similar way.

 

The EPA’s advice to Chicago residents about lead in drinking water is specific:

 

  • If you have a lead service line, flush the tap you’ll use, such as the kitchen tap, for 3 to 5 minutes, or longer if your water provider tells you to. To avoid wasting the water, time the flush with a shower or a load of laundry.

 

  • Use a water filter certified to remove total lead.

 

  • Clean faucet aerators regularly, since lead particles can get trapped in them.

 

  • Use cold water for drinking, cooking, and baby formula. Hot water can carry more lead.

 

  • Chicago residents can call 311 to ask about testing.

 

The City of Chicago’s water page also recommends flushing your water system every day. Boiling does not remove lead, according to the EPA. If you’re not sure what your service line is made of, treat it as lead until you know. Our lead service line replacement service can identify what’s in the ground and replace it.

 

If the City Issues a Boil Order

 

A boil order means the water could carry germs. The CDC’s guidance for drinking water advisories is to use bottled water, or to bring tap water to a rolling boil for one minute and let it cool before drinking or cooking with it. During an advisory, don’t use water or ice from the dispensers on your refrigerator or freezer, because they’re connected to your water line. The CDC says it’s safe to wash clothes as usual. Boiling kills germs but does not remove chemicals, so a boil order and the lead steps above are separate issues, and you may need to follow both. The city’s notice will say when the advisory is lifted.

 

If Water Is Coming Into Your Basement or Yard

 

If water is entering from outside, keep out of standing water near electrical outlets, the panel, or appliances, and don’t wade into a flooded basement with the power on. If the water is coming from your own service line, shut off the main valve inside the house. Call 311, photograph the damage and the source, keep receipts for any cleanup, and call your insurer promptly. Our basement flooding services can help with the cleanup and with finding out how the water got in.

 

When the Problem Is Your Own Service Line

 

Not every low-pressure problem is a city main. Signs that the leak is on your side include a soggy spot or sunken area between the street and the house, a water bill that climbs with no change in use, the sound of running water with every fixture off, and low pressure in your house while your neighbors have normal pressure. Call 311 first so DWM can determine whether the break is public or private. If it’s private, our leak detection services locate the leak, and our water line repair and replacement team fixes it. If your pressure stays low after the city says service is restored and the neighbors are back to normal, call us, because a partial blockage or a failed valve on your side are worth ruling out.

 

Renters, Condos, and Multi-Unit Buildings

 

If you rent or live in a multi-unit building, tell your landlord or property manager as soon as you notice a change in the water. The flushing steps above apply in every unit, and the building’s shared plumbing and water heaters may need attention that you can’t handle yourself. Photos and dated notes help if there’s later a question about when a problem began and who was told.

 

Be Careful Who You Let In

 

Anyone who knocks on your door after a water event, claiming to be from the city or offering water testing, filters, or line replacement, should show identification, and you can confirm with 311 before you let them in. Illinois law lists the warning signs of home repair fraud, covered in our guide to common plumbing scams in Illinois, and a rushed decision about a lead line or a filter is not one you need to make at the door.

 

Prepare Before the Next Break

 

  • Know where your main water shutoff is and that it turns.

 

  • Find out what your service line is made of, and whether your property qualifies for a city replacement program.

 

  • Keep at least a three-day supply of drinking water, one gallon per person per day.

 

 

  • Keep a lead-certified filter or bottled water on hand if you have a lead line.

 

  • Clean your aerators on a schedule rather than only after a problem.

 

  • Save a plumber’s number where you can find it.

 

Frequently Asked Questions

 

Who fixes a water main break in Chicago?

 

The City of Chicago’s Department of Water Management repairs the public side, including the main. The property owner is responsible for repairs on the private side of the service line. Call 311 and a DWM investigator will determine which side a leak or break is on.

 

Is brown water after a main break safe to drink?

 

Discolored water is usually sediment and rust stirred up in the lines, but you shouldn’t drink or cook with it until it runs clear, and you should follow any advisory from the city. If it doesn’t clear after running cold water for a while, call 311.

 

Why is my water cloudy or milky after the water comes back?

 

Utilities commonly explain that water that looks milky but clears from the bottom of a glass is full of tiny air bubbles from the lines, and it settles as the system stabilizes. Brown, yellow, or gritty water is sediment, and it should be flushed until it runs clear.

 

Why should I run cold water instead of hot water first?

 

Running hot water first can pull sediment into your water heater. Water utilities commonly advise flushing the cold line until it’s clear before using any hot water.

 

Does boiling water remove lead?

 

No. The EPA says boiling does not remove lead, and the CDC says boiling does not remove chemicals. Use a filter certified to remove total lead and use cold water for drinking and cooking.

 

Can I wash clothes during a boil order?

 

The CDC says it is safe to wash clothes as usual during a boil water advisory. It also says not to use water or ice from refrigerator and freezer dispensers.

 

Will the city pay to replace my lead service line?

 

It may. The Department of Water Management’s Leaks and Breaks program offers free lead service line replacement and a new meter for properties with a leaking or broken lead service line, and its block-level program covers properties affected by water main or sewer main replacement work. Call 311 to check eligibility before you pay for private replacement.

 

I live in a suburb, not Chicago. Do the same steps apply?

 

The steps inside your house are the same: cold water first, clean the aerators, and follow any advisory. The difference is who you call. Contact your village’s public works department instead of 311, and ask them where the public side of your service line ends.

 

Know Which Pipe Is Yours Before the Next Break

 

The main in the street is the city’s, and the lines and fixtures inside your property are yours. The people who handle a main break well are the ones who already know where their shutoff is, what their service line is made of, and what to run first when the water comes back. If you’d like your line, your water heater, and your fixtures checked, our emergency plumbing services team is available around the clock.

 

Water Trouble After a Main Break?

Licensed, insured, and serving Chicago and the surrounding suburbs since 1978. Call now or fill out the form below and we’ll follow up fast to get you scheduled today.






Chicago: 773-570-2191 | Suburbs: 630-749-9057 / 708-801-6530 | Emergency: 708-518-7765 | Open 24/7

—

Suburban Plumbing Sewer Line & Drain Cleaning Experts
Licensed & Insured | Open 24 Hours | Serving Chicago & the Suburbs Since 1978
📞 Chicago: 773-570-2191 | 🚨 Emergency: 708-518-7765